Experiment No :06 Design of simple hydraulic systems used in practice using manufacturers’ catalogue and analysis using software such as Automation Studio

-

 Expt No :06   Design of simple hydraulic systems used in practice using manufacturers’ catalogue and analysis using software such as Automation Studio

Aim: Design of simple hydraulic systems used in practice using manufacturers’ catalogue and analysis using software such as Automation Studio

Apparatus:  Automation studio Software 5.7

Theory:

A hydraulic circuit is a group of components such as pumps, actuators, control valves, conductors and fittings arranged to perform useful work. There are three important considerations in designing a hydraulic circuit:

 

1. Safety of machine and personnel in the event of power failures.

2. Performance of given operation with minimum losses.

3. Cost of the component used in the circuit.

 

Approach for Solution:

Step 1:  Draw hydraulic Circuit for given problem.

Step 2:  Selection of Cylinder

Step 3 : Selection of Pump

Step 4: Selection of Oil Reservoir

Step 5 : Selection for other components

 



Batch 1 

Problem Statement:

 

 

Batch 2

 

Batch 3

Batch 4

 


Comments

Post a Comment

Popular posts from this blog

Experiment No :09 Assignment: Standard specifications of hydraulic/ pneumatic components using manufacturer’s catalogues

-
  Experiment No :09    Assignment: Standard specifications of hydraulic/ pneumatic components using manufacturer’s catalogs Assignment: Standard specifications of hydraulic/ pneumatic components using manufacturer’s catalogs Write up should include : ü   Name of Component ü   Types ü   Construction & working ü   application ü   symbol ü   attach the print out of the catalogue of available on internet for the same component along with specifications     Roll No Topic Name 1 Hydraulic Double Acting Actuator 2 3 4 5 6 Gas Loaded Accumulator 7 8 9 10 11 Pump (Gear or Vane or Piston) 12 13 14 15 16 Direction Control Valves 17 18 ...
Read more

Experiment No :05 Following experiments to be done on pneumatic trainer:

-
Image
  Expt No :05   Following experiments to be done on pneumatic trainer:   a. Automatic reciprocating circuit      b. Speed control circuit          c. Electro pneumatic circuits                            d. Pneumatic circuit involving Shuttle valve/ Quick exhaust valve / Two pressure valve Aim : To study various pneumatic circuits to control single-acting and double-acting cylinders Apparatus :    Hydraulic trainer Precautions:     ü   Always keep the sufficient air supply pressure to the Electro-Pneumatic Trainer ü   Keep the air filter regulator knob (AFR) in locked position at the pressure required for   particular experiment. ü   Always maintain the pressure in the compressor more than 2.5kg/cm². ü   Maintain oil level in the ...
Read more

Experiment No: 02 Demonstration of Hydraulic Circuits on Hydraulic Trainer Kit

-
Image
  Experiment No : 02  Demonstration of Hydraulic Circuits on Hydraulic Trainer Kit   Following experiments to be done on hydraulic trainer:  a. Regenerative circuit                                     b. Speed control circuit  c. Sequencing circuit                                       d. Traverse and feed circuit Aim: To study various hydraulic circuits to control single-acting and double-acting cylinders Apparatus :    Hydraulic trainer [ L=900mm,W =600mm,H =1400mm , Max Working Pressure = 20kg/cm 2   , Tank Capacity =30 Liter, Hydraulic Oil Enclo-68 ] Precautions...
Read more